Automotive clear coat paint automotive acrylic paint metallic gold car paint gloss car paint
Features:
1. high gloss, good property, excellent pretective and coveraging power,excellent weathering and chemical resistance.
2. Rich color and high luster, better flexibility
3. Fast-drying and scratch-resistant
4. Excellent protection against rust, impact, UV etc
5. Will not fade or yellow
6. Super environmental protection
Usage:
Appliance Paint, Boat Paint, Building Coating, Car Paint, Electrical Insulating Varnish, Furniture Paint, Paper Coating, Plastic Coating, Road Marking Paint, Rubber Coating, Car Paint for cars, MPV, Bus, Bike, etc
| Drying Time | Temperature | Dust Free | Tack Free | Dry To Handle | Dry To Test |
| +25°C | 40 minutes | 2 hours | 9 hours | 6 Days |
| +70°C | 5 minutes | 10 minutes | 25 minutes | 50 Minutes |
Spray gun set up:
Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 3-5kg/cm2 Suction Feed: 1.4-1.6mm 3-5kg/cm2 |
Spray Technology:
Coats& Thickness: 2-3 coats,total 35-50um
Flash-off Time: At 25℃,5-10 minutes between two coats,
Air-Drying Time: Allow 10-15 minutes air drying time before force drying.
construction technology:
1. Clean&Shade
Remove wax oil and other impuritieswith deoiling detergent Examine andassess the location and extent of damage.
2. Grind damaged parts
Grinding with abrasive paper(#80# 2000). Dry grinding withsandpaper(#80, 120, 180) first.
3. Dust cleaning
Use a degreaser to remove greasefrom the workpiece.
4. Fill& Grind
Add thne hardener I proportionmix and fill the putty, Sanding(#80. 120, 180) after drying.
5. Clean &Grind
Clean the surface again, and thenfinely grind the filling to the leveof the paint.
6. Spray primer surfacer
Mix and spray primer according toproduct requirements, each layerneeds to be matte.
7.Grind primer surfacer
After the primer is dried, dry sandingpaper(3320-400)is used with atwo-way sander. Manual grindingon the edge(#600-800)
8. Clean & Wipe
Use a cleaner to clean the grease.and tack cloth to clear of dustand particles.
9. Spray 1K color paint
Add thinner as requiredspray2-3ayers, spray interval of 5-10nutes per layer.
10. Spray Varnish(clear coat)
Add hardener and thinner asrequired, spray two layerseach interval is 5-10 minutes.
11. Dry Bake
After the varnish is sprayed. it needbe allowed to stand for 10-15minutes can be baked or driednatur.
12. Waxing &Polish
Can be sanded with abrasivepaper(#2000)first if necessaryThen use related products forwaxing and polishing
Saft Precautions :
1. Keep container in a well ventilated and cool place
2. Keep away from fire
3. Avoid contact with eye and skin
4. Wear suitable gloves and eyes protection
5. Don't empty into drains
6. Against static discharges
Product Tags:
|
|
Chemical Resistance Transparent Auto Spray Paint , Metallic Gold Automotive Clear Coat Spray Images
|
